Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DZ770E
  5. Operating Guide

Panasonic PT-DZ770E Operating Guide

Download
Page of 124
[SIGNAL LIST] menu
ENGLISH - 77
Settings
Protecting the registered data
1)  Press ▲▼◀▶ to select the signal to 
protect.
2)  Press the <ENTER> button.
▶
z
The 
[REGISTERED SIGNAL STATUS] screen 
is displayed.
3)  Press the <ENTER> button.
▶
z
The 
[REGISTERED SIGNAL SETUP] screen is 
displayed.
4)  Press ▲▼ to select [LOCK].
5)  Press ◀▶ to switch [LOCK].
▶
z
The setting will change as follows each time 
you press the button.
[OFF]
[ON]
[OFF]
The signal is not protected.
[ON]
The signal is protected.
Note
 
z
When [LOCK] is set to [ON], signal delete, image 
adjustment and auto setup are not available. To 
perform these operations, set [LOCK] to [OFF].
 
z
A signal can be registered to sub memory even if it 
is protected.
 
z
Even a protected signal will be deleted if 
[INITIALIZE] is executed.
Expanding signal lock-in range
1)  Press ▲▼◀▶ to select the signal to 
set.
2)  Press the <ENTER> button.
▶
z
The 
[REGISTERED SIGNAL STATUS] screen 
is displayed.
3)  Press the <ENTER> button.
▶
z
The 
[REGISTERED SIGNAL SETUP] screen is 
displayed.
4)  Press ▲▼ to select [LOCK-IN RANGE].
5)  Press ◀▶ to switch [LOCK-IN 
RANGE].
▶
z
The setting will change as follows each time 
you press the button.
[NARROW]
[WIDE]
[NARROW] Select in most cases.
[WIDE]
Widens the lock-in range.
Note
 
z
Switch the range that determines that a signal to be 
input is the same signal that is already registered.
 
z
To prioritize the determination that it is the same 
signal that is already registered, set to the [WIDE] 
setting.
 
z
Use in cases such as when the synchronizing 
frequency of a signal to be input has changed 
slightly, or multiple signal lists are registered.
 
z
Can only be used when a signal is input from the 
<RGB 1 IN> terminal, <RGB 2 IN> terminal, <DVI-D 
IN> terminal, or <HDMI IN> terminal.
 
z
When [WIDE] is set, the image may appear 
distorted because a signal is determined to be the 
same signal even if a synchronizing frequency 
changes slightly.
 
z
When a signal to be input corresponds to the 
signal set in [WIDE], a registered signal with a high 
memory number receives priority. Example: A signal 
to be input that corresponds to memory numbers 
A2, A4 and B1 will be determined to be B1.
 
z
When a registration signal is deleted, the settings 
are also deleted.
 
z
In an environment where multiple types of signals 
are input to the same terminal, signals are 
sometimes not determined correctly when settings 
are set to [WIDE].