Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DZ770E
  5. Operating Guide

Panasonic PT-DZ770E Operating Guide

Download
Page of 124
[SECURITY] menu
ENGLISH - 79
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 
z
When the projector is used for the first time
Initial password: Press ▲▶▼◀▲▶▼◀ in 
order, and press the <ENTER> button.
 
z
After selecting the item, press ▲▼◀▶ to set.
Attention
 
z
When you select the [SECURITY] from the main 
menu and press the <ENTER> button, entering a 
password is required. Enter the set password and 
then continue operations of the [SECURITY] menu.
 
z
When the password has been changed previously, 
enter the changed password, and press the 
<ENTER> button.
Note
 
z
The entered password is displayed with * mark on 
the screen.
[SECURITY PASSWORD]
The 
[SECURITY PASSWORD] screen is displayed 
when the power is turned on. When the entered 
password is incorrect, the operation will be restricted 
to the power standby < > button, the <SHUTTER> 
button, and the <LENS> (<FOCUS>, <ZOOM>, and 
<SHIFT>) buttons.
1)  Press ▲▼ to select [SECURITY 
PASSWORD].
2)  Press ◀▶ to switch [SECURITY 
PASSWORD].
▶
z
The setting will change as follows each time 
you press the button.
[OFF]
[ON]
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
 
z
The [SECURITY PASSWORD] setting is set to 
[OFF] at the time of purchase or when all the user 
data has been initialized.
 
z
Change the password periodically that is hard to 
guess.
 
z
The security password will be enabled after setting 
[SECURITY PASSWORD] to [ON] and turning the 
<MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD 
CHANGE]
Change the security password.
1)  Press ▲▼ to select [SECURITY 
PASSWORD CHANGE].
2)  Press the <ENTER> button.
▶
z
The 
[SECURITY PASSWORD CHANGE] 
screen is displayed.
3)  Press ▲▼◀▶ and the number (<0> to 
<9>) buttons to set the password.
▶
z
Up to eight button operations can be set.
4)  Press the <ENTER> button.
5)  Re-enter the password for the 
confirmation.
6)  Press the <ENTER> button.
Note
 
z
The entered password is displayed with * mark on 
the screen.
 
z
An error message is displayed on the screen when 
the entered password is incorrect. Re-enter the 
correct password.
[DISPLAY SETTING]
Overlap the security message (text or image) over the 
projecting image.
1)  Press ▲▼ to select [DISPLAY 
SETTING].
2)  Press ◀▶ to switch [DISPLAY 
SETTING].
▶
z
The setting will change as follows each time 
you press the button.
[OFF]
[TEXT]
[USER LOGO]
[OFF]
The text display is disabled.
[TEXT]
The text display is enabled.
[USER LOGO] The picture registered by the user 
is projected.
Note
 
z
To create the image for [USER LOGO], “Logo 
Transfer Software” included in the supplied CD-
ROM is required.