Panasonic HLBT62SEPG Operating Guide

44

45

EN

The oven may require special 

maintenance or replacement of 

parts subject to wear such as seals, 

bulbs, etc. The following instructions 

describe how to carry out these minor 

maintenance operations.  

Before any intervention that requires 

access to live parts, disconnect the 

appliance from the power supply.  

Replacing the light bulb 

 WARNING

 

Ensure that the appliance is 

disconnected from the power supply 

before replacing the lamp, to avoid 

the possibility of electric shock.

If a light bulb needs to be replaced 

because it is worn or burnt out, remove 

the guide frames; see “page 40 EN,  

Removing guide frames”. 

Then carefully remove the bulb cover 

using a suitable tool (e.g. a flat bladed 

screwdriver).  

Remove the bulb by sliding it out as 

shown.

The bulbs are halogen, so do not touch 

them directly with your fingers, wrap 

them in an insulating material.

Replace the bulb with one of the same 

type G9 Halogen (40 W / 230 V). 

Replace the cover correctly, so that the 

moulded part of the glass is facing the 

door. 

 

„

Note

Press the cover down as far as it will 

go so that it attaches completely to 

the bulb support.  

Special maintenance