Panasonic PTD7600E Operating Guide

Using the remote control unit

ENGLISH

Loading dry cells

When loading supplied AA dry cells into the battery
compartment of the remote control, make sure that
their polarities are correct.

1. Open battery compartment lid.

Open the lid in the order of steps

and

2. Insert the dry cells.

Into battery compartment, with their polarities
orientated as indicated (

)in the

compartment.

Effective range of remote
control operation

The remote control should normally be aimed at either
the front or rear remote control receiver window on the
projector (fig. 1). Otherwise, it may also be aimed at
the screen, which will reflect commands back to the
projector's front receiver window as illustrated in figure
2.

The effective control range is approx. 7 meters from
the beam receiver on the front or rear.

• Do not drop the remote control unit.
• Do not expose remote control unit to

any liquid.

• Do not use NiCd batteries.

• When the remote control is aimed at

the screen, the effective control range
may be reduced due to the optical
loss by screen reflection.

• The remote control may not function

properly if an object is in the light
path.

• The remote control receiver may not

function properly in intense ambient
light such as fluorescent lamps.
Carefully site the projector so its
remote control receiver windows will
not be directly exposed to intense
light.

Supplied AA dry cells
(insert the

side first).

(Front)

(Rear)

[Top view]

Remote
control

[Side view]

Remote
control

Screen

Projector

Remote control
receiver window
(front)

Remote control
receiver window
(rear)

Remote control

Note

figure 1

figure 2

3. Close the battery compartment lid.

Replace the battery compartment lid over the
compartment and slide until it clicks.

Attention