Panasonic KXMB2001GX Operating Guide

We recommend setting the date and time. The other
party will receive your unit’s date and time as the header
information.

MFNMEN

MSetN

MMenuN

MMenuN A MBNM1NM0NM1N A MSetN

Enter the current date/month/year by selecting 2
digits for each.
Example: 3 August, 2013
M0NM3N M0NM8N M1NM3N

Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1NM0N M1NM5N
2. Press MGN repeatedly to select “PM”.
Press MGN repeatedly to select “AM” or “PM”, or
24-hour time entry.

MSetN

Press MMenuN to exit.

Note:
R Your unit’s date and time will be used as the header

information for the following:
– When sending as an attached file to an email

destination directly from this unit (Scan to email
address) (page 26).

R If the date and time is not set correctly, the other party

will receive an incorrect date and time as their
header. This may confuse the other party.

To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.

You can print documents and scan documents using a
computer connected to the LAN. To enable these
features, you need to set the IP address, subnet mask,
and default gateway in the unit.

Important:
R Consult your network administrator when setting

Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server,
it will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.

After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
R The IP address, subnet mask, and default

gateway will be set automatically.

Install Multi-Function Station on the computer that
you want to use it with. See page 19 for details.

Note:
R You can connect two or more units and assign IP

addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.

Your situation:
– When your network administrator does not manage

the network with a DHCP server.

– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.

MMenuN

Press MBNM5NM0NM0N to display “DHCP”.

Press M0N to select “DISABLED”. A MSetN

Set each item.
For the IP address:
1. Press M5NM0NM1N to display “IP ADDRESS”. A

MSetN

2. Enter the IP address of the unit. A MSetN

For the subnet mask:
1. Press M5NM0NM2N to display “SUBNET MASK”.

A MSetN

2. Enter the subnet mask of the network. A MSetN

18