Panasonic KXMB2001GX Operating Guide

Setting the recording paper
type for manual input tray
MBNM3NM8NM4N

M1N “PLAIN PAPER” (default): 75 g/m

2

 to 90 g/m

2

 paper.

M2N “THIN PAPER”: 64 g/m

2

 to 75 g/m

2

 paper.

Note:
R This setting will be deactivated when printing from a computer. To set the

Setting the waiting time for
the power save mode
MBNM4NM0NM3N

To set the length of time before the unit enters power save mode.
M1N “1min” (default): 1 minute
M2N “5min”: 5 minutes
M3N “15min”: 15 minutes
M4N “30min”: 30 minutes
M5N “1h”: 1 hour

Note:
R When in power save mode, the unit needs to preheat the fuser unit before

it can begin printing.

Holding the previous contrast
setting
MBNM4NM6NM2N

M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.

Note:
R The previous setting will be held individually for copying.

Viewing the counter for
departments
MBNM4NM7NM9N

Setting toner save feature
MBNM4NM8NM2N

M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The toner cartridge will last longer.

Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.

40