Panasonic CZ256ESMC2 Operating Guide

32

6.4.1.1 Operating units individually

Use this screen to operate individual indoor units.

Procedure

Select  1.Status/Control  in the main menu and  1.Each tenant  in the sub menu.

1

  When you touch the unit that you want to set, a remote control window for individual on/off 

operations appears.

2

  When you touch 

, a remote control window appears. This window allows you to 

make detailed settings for operations on individual units.

a

b

d

e

f
g

i
j

k

l

c

h

1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings

1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units

• For multiple units, the operation mode for one unit may not be varied while another indoor unit is under 

operation.  In such a case, once stop the unit, hold it for several minutes, and then vary the operation 

mode.

• In the remote control window, the fi rst 16 characters for tenant names and the fi rst 12 characters for unit 

names are displayed.

Main

Sub

a.  Closes the remote control window.
b.  Sets to either Start or Stop.
c.  Sets the operating mode.
d.  Set the temperature.
e.  Sets the fan speed.
f.   Sets the fan direction. This setting is applied to 

the entire group. You cannot change the sub 
unit setting independently.

g.  Sets and cancels timer operation.
h.  Sets timer number from No. 1 to No. 50.

i.   Displays a window that allows you to check timer 

setting status and remote control prohibition 
status.

j.  Displays one of “Prhbt1/ Prhbt2/ Prhbt3/ Prhbt4/

Accept”.

k.  Turns the ventilation function ON and OFF. (You 

cannot press the button when air conditioners 
have no ventilation functions).

l.   Resets fi lter cleaning signs.

CZ-256ESMC2_EN.indb   32

CZ-256ESMC2_EN.indb   32

9/14/2011   3:16:50 PM

9/14/2011   3:16:50 PM