Panasonic MCUL594 Operating Guide

7

•  While storage the vacuum cleaner, turn the upper cord storage hook in  

  the upright position and wind the mains lead around the upper and lower  

  cord storage hooks as shown.

•  In order to have a proper arrangement of mains lead while storage the  

  vacuum cleaner, it is advisable to use the mains lead hook as shown in  

  the diagram.

•  Rotate the filter refresher 2 full turns before and after cleaning. 

•  This will remove fine dust from the filter for improved and long lasting  

  suction power. 

•  The overload protection inside the nozzle stops the nozzle motor when  

  the beater bar jams to prevent belt breakage.

The vacuum cleaner motor will continue to run.

•  Switch the unit off.

•  Unplug the mains lead.

•  Check nozzle areas for excessive lint build up or jamming.

•  Clean jammed area.

•  Press reset button on top of the nozzle. Plug in and turn on vacuum  

  cleaner.

Overload Protection 

Reset Button

Filter 

Refresher

•  This model is fitted with an auto beater bar stop.

•  While operating the vacuum cleaner at the “CARPET” position, the beater  

  bar will automatically stop rotating when the body of the vacuum cleaner  

  was put at the upright position as shown.

Upper Cord 

Storage Hook

Mains Lead

Mains Lead

Hook

Lower Cord 

Storage Hook 

(Carrying Handle)

•  Edge cleaning feature enables improved cleaning of carpets near walls  

  and furniture.

Beater Bar : On

Beater Bar : Off