Panasonic MCUL594 Operating Guide

OFF FLOOR CARPET

8

1.  Turn the upper cord storage hook to release the mains lead.

To avoid any possible damage to the mains lead, never run over the mains lead or allow it to become caught in the beater bar.

•  Plug the mains lead into the wall socket.

•  Slide the switch knob to the right to the selected position to turn the  

  vacuum cleaner on.

•  When finished vacuuming, slide the switch knob to the left until the “OFF”  

  position.

•  Unplug the mains lead from the outlet when not in use.

2.  Fix the mains lead into the cord clip to help secure it  

  during use and turn back the upper cord hook in the  

  upright position.

•  Switch Knob should be placed in “FLOOR” position when using vacuum  

  cleaner on bare floors and when using tools. The beater bar does not  

  rotate in the “FLOOR” position but rotate only in the “CARPET” position.

•  Switch Knob should be placed in “CARPET” position when using vacuum  

  cleaner on carpeted floors.

OFF FLOOR CARPET

Switch Knob

1.  Upright position

  The handle should be in an upright  

  position for storage and when cleaning  

  tools are used.

2.  Middle position

  For normal cleaning, step the foot  

  pedal and pull back the handle to a 

  comfortable angle and release the  

  foot pedal.

3.  Low position

  For cleaning under furniture, step the 

  foot pedal again and the handle may  

  now be lowered almost to the floor  

  as shown.

To unlock the handle of the vacuum cleaner, step on the foot pedal. To return into the upright position, simply put the handle back.

Foot Pedal

Foot Pedal