Panasonic KXTG5523E Operating Guide

Page of 52
Programming
26
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Special programming
Alarm
An alarm sounds at the set time for 3 
minutes once or daily. Alarm can be set 
for each handset.
Important:
L
Set the date and time beforehand 
(page 14).
1
8
 i {#}{7}{2}{0}
2
{V}
/{^}: Select the desired alarm 
option. i M
3
Enter the desired date and month. 
i
 M
4
Set the desired time. i M
5
{V}
/{^}: Select the desired alarm 
tone. i M
L
We recommend selecting a 
different ringer tone from the one 
used for outside calls.
6
M
 i {ic}
L
When the alarm is set, E is 
displayed.
Note:
L
To stop the alarm, press any dial key 
or place the handset on the base unit 
or charger.
L
When the handset is in use, the alarm 
will not sound until the handset is in 
standby mode.
Changing the handset name
Each handset can be given a 
customised name (“Bob”, “Kitchen”, 
etc.). This is useful when you make 
intercom calls between handsets. You 
can also select whether or not the 
handset name is displayed in standby 
mode. The default setting is “Off”. If 
you select “On” without entering any 
handset name, “Handset 1” to 
“Handset 6” is displayed.
1
8
 i {#}{1}{0}{4}
2
Enter the desired name (max. 10 
characters; page 39).
L
If not required, go to step 3.
3
M
4
{V}
/{^}: Select the desired setting. 
i
 M 2 times
5
{i
c}
Incoming call barring (Caller 
ID subscribers only)
This feature allows the unit to reject calls 
from specified phone numbers that you 
do not want to answer such as junk calls.
When a call is received, the unit does not 
ring while the caller is being identified. If 
the phone number matches an entry in 
the call barred list, the unit sends out a 
busy tone to the caller, and then 
disconnects the call.
Important:
L
When the unit receives a call from a 
number that is stored in the call barred 
list, the call is logged in the caller list 
(page 29) with 7 after the call is 
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in 
the call barred list by using the caller list 
or by entering the numbers directly.
“Off”
Turns alarm off. Go to step 6.
“Once”
An alarm sounds once at the set 
time.
“Daily”
An alarm sounds daily at the set time. 
Go to step 4.
TG5521E(e).book  Page 26  Tuesday, March 16, 2010  7:47 AM