Panasonic PT-D4000E Operating Guide
35
ENGLISH
Displaying the internal test pattern
SYSTEM INFORMATION
The projector’s system information can be viewed.
SYSTEM INFORMATION
MAIN VERSION
NETWORK VERSION
PROJECTOR RUNTIME
LAMP1
LAMP2
LAMP1 ON
NETWORK VERSION
PROJECTOR RUNTIME
LAMP1
LAMP2
LAMP1 ON
RETURN
LAMP2 ON
1.00.00
1.00
300h
100h
100h
100h
100h
20
20
20
AUTO POWER OFF
The projector can be automatically set to the
standby mode if no signals are input for the set
duration.
standby mode if no signals are input for the set
duration.
DISABLE:
This is the standard setting. This function is set
to OFF.
to OFF.
45MIN. – 90MIN.:
The duration can be set in 15-minute
increments from 45 to 90 minutes.
increments from 45 to 90 minutes.
DATE AND TIME
This lets you set the time zone and the current date
and time for the projector’s internal clock.
and time for the projector’s internal clock.
TIME ZONE
: Set the time zone of your country.
ADJUST CLOCK
: Set the current date and time.
LOCAL DATE/LOCAL TIME
: Date and time set in above are displayed.
PASSWORD
This function is used by a service person.
Input the password with the numeric buttons (0 to
9) of the remote control and press the ENTER
button to confirm the entry.
Input the password with the numeric buttons (0 to
9) of the remote control and press the ENTER
button to confirm the entry.
The projector has eight types of internal test patterns
to check the condition of the set.
To display test patterns, follow the steps below.
to check the condition of the set.
To display test patterns, follow the steps below.
Press the TEST PATTERN button on the
remote control.
Or select “TEST PATTERN” in the MAIN
MENU and search through the various
types of test patterns by using
buttons.
remote control.
Or select “TEST PATTERN” in the MAIN
MENU and search through the various
types of test patterns by using
buttons.
• Results of adjustment on the image,
picture quality, position, size and other
factors will not be reflected in test
patterns. Be sure to display the input
signal before performing various kinds
of setting.
factors will not be reflected in test
patterns. Be sure to display the input
signal before performing various kinds
of setting.
Note
Cycle of displayed internal
test patterns
test patterns
MENU screen
+
Entry screen
All white
All black
Flag
16:9 frame
Focus
Colour bars
Window (inversion)
Window
Black on
white ground
White on
black ground
D4000E_En_0607 07.6.8 11:00 ページ 35