Panasonic MCUG522 Operating Guide

Attach the hose to the suction inlet on the back of the
vacuum cleaner aligning the tabs as shown.

Push in and snap both tabs in place.  A noticable click
can be heard.

Route the hose as shown.

Insert the raised tab on the wand into the “J” slot on the
hose handle. Twist the wand to lock in place.

Make sure that the quick release cord hook is rotated in
the upright position as shown.

Insert mains lead into the locking notch on rear of the
handle.

Wrap mains lead loosely around quick release cord hook
and lower cord hook.

Lock the plug onto the mains lead.