Panasonic MCUG522 Operating Guide
- 7 -
A) MAINS LEAD
Quick Release
Cord Hook
Cord Hook
1
1
Mains Lead
Locking Notch
1
3
Turn the quick release upper cord
hook to either side and down to
release the mains lead.
hook to either side and down to
release the mains lead.
Detach the plug from the mains lead
and pull the mains lead off the quick
release upper cord hook.
and pull the mains lead off the quick
release upper cord hook.
Be sure the mains lead is locked
under the locking notch on the rear of
the handle.
under the locking notch on the rear of
the handle.
Plug the mains lead into a 240 volt
mains socket located near the floor.
mains socket located near the floor.
Note: To store mains lead, turn the
quick release cord hook to the up
position, then wrap cord loosely
around quick release cord hook
and lower cord hook. Refer to
MAINS LEAD STORAGE (page 6).
quick release cord hook to the up
position, then wrap cord loosely
around quick release cord hook
and lower cord hook. Refer to
MAINS LEAD STORAGE (page 6).
HOW TO OPERATE YOUR VACUUM CLEANER
B) ON/OFF SWITCH
To turn vacuum cleaner on or off, press on the on/off
switch.
switch.
On/Off Switch
1
1
CAUTION
To prevent damaging carpeted floors, tiled floors,
linoleum, etc. Do not leave the beater bar rotating in
the same place for too long.
linoleum, etc. Do not leave the beater bar rotating in
the same place for too long.
CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT touch
the beater bar when vacuum cleaner is on. Contacting the beater bar
while it is rotating can cut, bruise, or cause other injuries. Always
unplug from electrical socket before servicing.
the beater bar when vacuum cleaner is on. Contacting the beater bar
while it is rotating can cut, bruise, or cause other injuries. Always
unplug from electrical socket before servicing.
Use caution when operating near children.
Mains Lead
Plug
1
3