Panasonic ERSB60 Operating Guide
16
English
Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade.
(See this page.)
2
Apply a drop of the oil to each
indicated point.
3
Attach the blade to the main
body, turn on the power and
allow to run for
approximately 5 seconds.
►
Replacement part
Replacement part is available at your dealer or Service Centre.
Replacement part for ER‑SB60/
ER‑SB40
Blade
WER9621
Removing and mounting the blade
►
Removing the blade
Hold the main body with the switch
facing upward and push the blade with
your thumb while catching the blade in
your other hand.
►
Mounting the blade
Fit the mounting hook (B) into the blade mounting (A) on the
main body and then push in until you hear a click.
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service centre authorized by
Panasonic for repair.
Problem
Action
The power switch does
not turn ON.
Unlock the switch lock.
(See page 12.)
The appliance has
become blunt.
Operating time is short.
Appliance stopped
functioning.
Until problems are solved, please
follow each procedure as follows;
1. Charge the appliance.
(See page 11.)
2. Clean the blade and apply oil.
(See pages 15 and 16.)
3. Replace the blade.
(See page 16.)
4. Have the battery replaced by
an authorized service centre.
The appliance cannot be
charged.
Insert the appliance plug into the
appliance firmly.
ER-SB60_40_EU.indb 16
2017/05/25 11:00:22