Panasonic KX-FPG391 Operating Guide
1. Introduction and Installation
14
For Fax Advantage assistance, call 1-800-435-7329.
Installation (Base Unit)
1.6 Ink film
The included film roll is a starter ink film.
1.6.1 Installing the ink film
Important:
L
Remove all the blue shipping tape from
the unit before installation.
the unit before installation.
1
Open the front cover by pulling up the center
part.
part.
2
Release the back cover by pushing the green
button (
button (
1).
L
You can also release the back cover by
pushing in the green lever (
pushing in the green lever (
2).
3
Open the back cover.
4
Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (
blue gear into the left slot of the unit (
1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (
white gear into the left slot of the unit (
2).
L
The ink film is safe to touch and will not
rub off on your hands like carbon paper.
rub off on your hands like carbon paper.
L
Make sure the blue gear (
1) and white
gear (
2) are installed as shown.
2
1
2
1
FPG391-PFQX2058YA_en.book Page 14 Thursday, December 21, 2006 10:04 AM