Panasonic KX-FPG391 Operating Guide

See page 23 for details.

See page 31 for details.

See page 32 for details.

See page 34 for details.

±]

To print a sending report for fax transmission 
results (page 54).
“

ERROR” (default): A sending report will be 

printed only when fax transmission fails.
“

ON”: A sending report will be printed after every 

transmission.
“

OFF”: Sending reports will not be printed.

±]

To change the number of rings before the unit 
answers a call in FAX ONLY mode.
You can select “

1”, “2”, “3” (default) or “4”.

±]

To change the number of rings before the unit 
answers a call in TAM/FAX mode. You can select 
“

2”, “3” (default), “4”, “5”, “6”, “7” or “TOLL 

SAVER”. See page 59 for details.

L

You can also program this feature with the 
handset (page 84).

±]

1 MIN”, “2 MIN” or “3 MIN” (default): 1 

minute to 3 minutes.
“

GREETING ONLY”: Only plays your greeting 

message.

L

If you select “

GREETING ONLY”, the unit will 

answer a call with the greeting message, and 
then hang up. The unit will not record any 
incoming messages.

L

You can also program this feature with the 
handset (page 84).

1. Press {MENU}.

2. Press {#}, then {1}{1}.

3. Enter a 2-digit number (00–99).

L

The default ID is “

11”.

4. Press {SET}.

5. Press {MENU}.

L

You can also program this feature with the 
handset (page 85).

±]

If you cannot make calls, change this setting 
depending on your telephone line service.
“

TONE” (default): For tone dial service.

PULSE”: For rotary pulse dial service.

L

You can also program this feature with the 
handset (page 86).

±]

LETTER” (default): Letter or legal size paper.

A4”: A4 size paper.

FPG391-PFQX2058YA_en.book  Page 75  Thursday, December 21, 2006  10:04 AM