Panasonic TH-47LF20E Operating Guide

1/2

Signal

Input label

Wobbling

Setup

Off

Power management
Auto power off

Off

Standby save

Off(SERIAL)

ECO

Off

OSD Language

English(UK)

Component/RGB-in select

RGB

Off

Screensaver

Press to select the menu to adjust.

Press to select “On” or “Off”.

On 

 Off

Press to exit from Setup.

• Power management: 

When this function is set to On, it operates under the following conditions to turn the 
power on or off automatically.

 

When no pictures are detected for 30 or so seconds during input from PC IN or 
DVI-D IN terminal:

 

  →  Power is turned off (standby); the power indicator lights up orange.

 

When pictures are subsequently detected:

 

  →  Power is turned on; the power indicator lights up green.

 

 

• This function operates only during input from PC IN or DVI-D IN terminal.

 • 

 

This function is effective when “Sync” is set to “Auto” and during normal viewing (one 
picture screen).

• Auto power off: 

Equipment power supply is turned Off when there is no signal.

 

When this is set to On, the power supply of the unit goes Off 10 minutes after the 
input signals stop. 

 

 

This function is effective during normal viewing (one picture screen).

• Standby save: 

            When this function is set to “On”, serial communication is disabled during standby 

mode, reducing the power consumption during standby. 

 

            To perform serial communication while in standby, set this function to “Off(SERIAL)”. 

However, the standby power consumption is greater than when it is set to “On”. 

• ECO: 

            This function adjusts the brightness of the backlight to reduce power consumption.

Off: This function does not operate.
On: Backlight brightness is reduced.
Sensor: The backlight brightness is automatically adjusted according to the viewing 
environment.

 

            Note:

 

            When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture 

menu is disabled.