Panasonic KXTGC220FX Operating Guide
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” or “Handset 2” is displayed.
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” or “Handset 2” is displayed.
1
M
N#104
2
Enter the desired name (10 characters
max.).
max.).
3
MOKN
4
MbN: Select the desired setting. a MOKN
2 times a M
2 times a M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
N#256
2
Enter the base unit PIN (default: “0000”).
R If you forget your PIN, contact an
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing 1 to 2.
R All handsets registered to the base unit
pressing 1 to 2.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “ ”
disappears.
disappears.
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
be restricted (8 digits max.). a MOKN a
M
N
Changing the base unit PIN
Important:
R If you change the PIN (Personal
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
N#132
2
Enter the current 4-digit base unit PIN
(default: “0000”).
(default: “0000”).
3
Enter the new 4-digit base unit PIN. a
MOKN
MOKN
4
MbN: “Yes” a MOKN a M
N
Changing the unit’s region
setting/Resetting the base unit
1
setting/Resetting the base unit
1
M
N#136
2
MbN: Select the desired country. a MOKN
“Other” = Countries except Czech and
Slovakia
“Česká rep.” = Czech
“Slovensko” = Slovakia
“Other” = Countries except Czech and
Slovakia
“Česká rep.” = Czech
“Slovensko” = Slovakia
3
MbN: “Yes” a MOKN a M
N
Note:
R Changing the unit’s region setting may
R Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
customised settings to return to their default
settings.
R When you select “Other” in step 2, the
Increasing the range of the base
unit
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
27
Programming
TGC210_212_220FX_(en-en)_140714_ver.110.pdf 27
2014/07/15 10:57:28