Panasonic KXMB2030BL Operating Guide
8.2 Basic features
Feature/Code
Selection
Setting the date and time
MBNM1NM0NM1N
MBNM1NM0NM1N
Setting your logo
MBNM1NM0NM2N
(KX-MB2030 only)
MBNM1NM0NM2N
(KX-MB2030 only)
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
MBNM1NM0NM3N
(KX-MB2030 only)
MBNM1NM0NM3N
(KX-MB2030 only)
Selecting the language
MBNM1NM1NM0N
MBNM1NM1NM0N
The display and reports will be in the selected language.
M1N “ENGLISH” (default): English is used.
M2N “FRENCH”: French is used.
M3N “DUTCH”: Dutch is used.
1. MMenuN A MBNM1NM1NM0N
2. Press M1N to M3N to select the desired language. A MSetN A MMenuN
M1N “ENGLISH” (default): English is used.
M2N “FRENCH”: French is used.
M3N “DUTCH”: Dutch is used.
1. MMenuN A MBNM1NM1NM0N
2. Press M1N to M3N to select the desired language. A MSetN A MMenuN
Setting recall/flash time
MBNM1NM2NM1N
(KX-MB2030 only)
MBNM1NM2NM1N
(KX-MB2030 only)
The recall/flash time depends on your telephone exchange or host PBX.
M0N “900ms”
M1N “700ms”
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms” (default)
MGN “90ms”
MBN “80ms”
M0N “900ms”
M1N “700ms”
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms” (default)
MGN “90ms”
MBN “80ms”
Note:
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
MBNM1NM4NM5N
contrast
MBNM1NM4NM5N
M1N “NORMAL” (default)
M2N “DARKER”
M2N “DARKER”
Selecting the scale
MBNM1NM4NM7N
MBNM1NM4NM7N
M1N “MILLIMETRES” (default)
M2N “INCHES”
M2N “INCHES”
Note:
R The selected scale will be used when measurements are shown on the
R The selected scale will be used when measurements are shown on the
unit’s display.
Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N
feature programming via
remote operation
MBNM1NM5NM5N
1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN
2. Enter the current password. A MSetN
R The default password is “1234”.
3. Enter a new 4-digit password using 0–9. A MSetN
4. Enter the new password again. A MSetN A MMenuN
4. Enter the new password again. A MSetN A MMenuN
Note:
R It is recommended that you change this password from the default
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser (LAN
connection only).
56
8. Programmable Features