Panasonic ERHGP62 Operating Guide
10
English
Charging the clipper
• Make sure that the clipper is turned off.
1
1
Connect the appliance
plug to the stand socket.
2
2
Place the clipper on the
charging stand.
3
3
Insert the adaptor into a
household outlet.
•Charging is completed after
approx. 1 hour.
•Check the charge status lamp
(
) glows.
3
3
2
2
1
1
4
4
Disconnect the power plug after charging is
completed.
(for safety and to reduce energy usage)
• Charging is required when the recharge
lamp blinks.
• The clipper can be used for approximately
5 minutes after the recharge lamp blinks.
When charging starts
When charging is
completed
10 minutes
after charging
is completed
Charge status lamp
glows.
The charge status
lamp blinks once
every second.
The charge status
lamp blinks once
every 2 seconds.
Notes
• If there is noise from the radio or other sources while using or
charging the appliance, move to a different location to use the
appliance.
• The battery will deteriorate if not used for over 6 months, so
make sure to perform a full charge at least once every 6 months.
• The charging time may differ when using the clipper for the first
time, or if it has not been used for more than 6 months. The lamp
on the main body may not glow for several minutes when first
starting charging, but will glow when continuing to charge.
• Recommended ambient temperature for charging is
10 °C – 35 °C. The battery may not charge properly or not at all
under extreme low or high temperatures.
• When the charge status lamp is blinking rapidly (twice every
second), there is a charging malfunction. Please charge the
battery in the recommended ambient temperature range.
• 1 full charge will provide approximately 50 minutes of continuous
operation. (Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the frequency of use
and the operating method.
• The battery used is a lithium‑ion, so charging after every use will
have no effect on battery life.
ER-HGP62.indb 10
2017/03/10 13:56:17