Panasonic ERHGP62 Operating Guide
11
Engli
sh
Charging without the charging stand
1. Press the power switch to turn off the power, and
insert the appliance plug into the clipper.
2. Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly
or stop, even with the AC operation. In this case, charge the
battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
Using the clipper
• Check that the blades are not damaged or deformed before use.
• Make sure that the clipper is turned off.
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
1
1
Select the trimming heights indicated on the
insides and sides of the attachments.
2
2
Press the power switch to turn on the clipper.
Removing and mounting the comb attachments
Mounting the attachment
Align the front of the attachment
Align the front of the attachment
with the blade (A), and then
press the attachment against the
main body (B).
Removing the attachment
Slide one side of the attachment off the
Slide one side of the attachment off the
mounting in direction indicated with the
arrow.
ER-HGP62.indb 11
2017/03/10 13:56:17