Panasonic NNCS894S Operating Guide
26
Let’s start to use your oven
1
Plug in
Plug into a 15 amp fused electrical socket. You will be
reminded to read your operating instructions.
reminded to read your operating instructions.
2
Tap Timer/Clock twice to set clock
Set clock as a 24 hr clock. (See page 27 for details).
3
Tap Convection
(
will appear in the display window with the oven
temperature) (this procedure is to burn off the oil used
for rust protection in the oven.) Tap the Convection
until 230 °C is in the display window. Remove all
accessories from the oven.
for rust protection in the oven.) Tap the Convection
until 230 °C is in the display window. Remove all
accessories from the oven.
4
Enter Time
Tap “+”/”-” or swipe the slider bar until 5 minutes is
displayed in the window.
displayed in the window.
5
Touch Start
The time will be displayed in the window and count
down. The oven will beep at the end of the program.
The oven is now ready to use.
down. The oven will beep at the end of the program.
The oven is now ready to use.
Caution!
Grill elements and oven will be hot.
Note:
Demonstration Mode
This is to enable you to experiment setting various
programs. (“DEMO MODE PRESS ANY KEY” will
appear in the display window. This is to confi rm that
there is no microwave power produced and it is safe to
use the oven without any food). To set Demonstration
Mode: tap Microwave power once, then tap
Stop/Cancel 4 times. To cancel Demonstration Mode
touch Microwave power once, tap touch Stop/Cancel
4 times.
programs. (“DEMO MODE PRESS ANY KEY” will
appear in the display window. This is to confi rm that
there is no microwave power produced and it is safe to
use the oven without any food). To set Demonstration
Mode: tap Microwave power once, then tap
Stop/Cancel 4 times. To cancel Demonstration Mode
touch Microwave power once, tap touch Stop/Cancel
4 times.
PA_F0003BH72BP_00_140331.indd 26
PA_F0003BH72BP_00_140331.indd 26
2014/4/1 9:45:32
2014/4/1 9:45:32