Panasonic KXTGMA45 Operating Guide

Page of 48
– “Alarm” (default: On)
This feature can be set for each unit.
1
For handset: MMENUN#278
2
MbN: Select the desired setting and press MSELECTN.
“ ” is displayed next to enabled items.
R To disable an item, select it and press MSELECTN again. “ ”
disappears.
3
MSAVEN a MOFFN
Using assistive listening devices
If you use hearing aids that are compatible with a neckloop, you can
connect your neckloop to a handset and enjoy hands-free conversations.
When talking on the phone, you can speak using the neckloop’s
microphone or the handset’s microphone depending on the neckloop’s
features and the handset’s settings.
– Hearing aids that are equipped with a telecoil (T-coil)
– Audio neckloops with a 3-pole, 2.5 mm plug
– Audio neckloops with a 3-pole, 3.5 mm plug
*1 In this case, a 3-pole 3.5 mm to 3-pole 2.5 mm adaptor is required.
To use with a T-coil-equipped hearing aid
1
Set your hearing aid to the "T" setting.
R Refer to your hearing aid’s operating instructions for details.
2
Hold the handset near your hearing aid when talking.
To use a neckloop
When using a neckloop with the handset, you can speak using the
neckloop’s microphone or using the handset’s microphone.
Important:
R You must set the headset type before use (page 20).
1
Connect the neckloop to the headset jack on the side of the handset.
For assistance, please visit http://shop.panasonic.com/support
19
Accessibility
TGMA44_45(en)_0606_ver101.pdf   19
2016/06/06   16:11:27