Panasonic SC-ZT1 Operating Guide

RQT9472

AC mains lead connection

Connection

For power consumption of speaker in standby, see page 16.

AC mains lead connection

Main unit

Connect AC mains lead after all other cables are connected.

This system consumes approx. 0.5 W when AC mains lead is connected to the household mains socket (approx.
0.2 W in standby condition (HDMI off mode) (➜ page 24)).

Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110 to 240 V, 50/60 Hz)

AC mains lead (included)

AC IN 㨪

Side view

Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110 to 240 V, 50/60 Hz)

AC mains lead
(included)

FOR THE UNITED KINGDOM, REPUBLIC OF IRELAND, SAUDI ARABIA, KUWAIT, MALAYSIA

AND HONG KONG ONLY READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE

CONNECTION.

To save power when the system is not to be used for a long time, unplug it from the household mains socket.
Make sure to turn this system off before unplugging the AC mains lead.
If you unplug the AC mains lead without turning this system off, some of the settings may not be saved.
Power supply differ depending on the symbols (E, GN, GS) indicated on the packaging box.

Speakers

Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the system.

Appliance inlet

Connector

Approx. 6 mm

The included AC mains leads are for use with this system only. Do not use them with other equipment. Also, do not use AC mains
lead for other equipment with this system.

Note