Panasonic KXTG6621FX Operating Guide
Programming
30
L
According to your country selection in step
2, the answering system announcement
language changes as follows
(KX-TG6621):
2, the answering system announcement
language changes as follows
(KX-TG6621):
L
After changing the unit’s region setting/
resetting the base unit, _ is displayed on
the handset momentarily. This is normal
and the handset can be used once w is
displayed.
resetting the base unit, _ is displayed on
the handset momentarily. This is normal
and the handset can be used once w is
displayed.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L
unit.
Important:
L
The additional handset model
recommended for use with this unit is noted
on page 5. If another handset model is
used, certain operations (handset settings,
base unit settings, etc.) may not be
available.
recommended for use with this unit is noted
on page 5. If another handset model is
used, certain operations (handset settings,
base unit settings, etc.) may not be
available.
Registering a handset to the base
unit
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is
not registered to the base unit (for example, _
is displayed even when the handset is near the
base unit), re-register the handset.
registered. If for some reason the handset is
not registered to the base unit (for example, _
is displayed even when the handset is near the
base unit), re-register the handset.
1
Handset:
8(13)
8(13)
2
Base unit:
Proceed with the operation for your
model.
■ KX-TG6611/KX-TG6612
Proceed with the operation for your
model.
■ KX-TG6611/KX-TG6612
Press and hold {x} for about 5
seconds. (No registration tone)
seconds. (No registration tone)
■ KX-TG6621
Press and hold {x} for about 5
seconds, until the registration tone
sounds.
seconds, until the registration tone
sounds.
L
If all registered handsets start ringing,
press {x} again to stop, then repeat
this step.
press {x} again to stop, then repeat
this step.
L
The next step must be completed
within 90 seconds.
within 90 seconds.
3
Handset:
M
M
s Wait until “Base PIN” is
displayed. s Enter the base unit PIN
(default: “0000”). s M
L
(default: “0000”). s M
L
If you forget your PIN, contact an
authorised service centre.
authorised service centre.
L
When the handset has been registered
successfully, w is displayed.
successfully, w is displayed.
Note:
L
L
While registering, “Base in
registering” is displayed on all
registering” is displayed on all
registered handsets.
L
When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
refer to the additional handset’s installation
manual for registration.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
8(131
L
L
All handsets registered to the base
unit are displayed.
unit are displayed.
2
{
r}
: Select the handset you want to
cancel. s M
3
{
r}
: “Yes” s M
L
A confirmation tone sounds.
L
The handset does not beep when
cancelling its own registration.
cancelling its own registration.
4
{i
c}
Increasing the range of the base
unit
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
TG661x_662xFX(e).book Page 30 Wednesday, March 2, 2011 2:31 PM