Panasonic DPMB311EU Operating Guide

You can change features through the web browser interface instead of the unit.

Start Multi-Function Station. A [Device] A [Configuration Web Page]
R You can also access the unit by entering its IP address in a web browser.

Select the desired category from the menu bar.
[Device]: features of the unit
[Network]: network features
[Directory]: registration of the address book, etc.

Type “root” as the user name, then enter the password (feature #155 on page 69). A [OK]

Select the desired feature from the menu.

Change the settings or edit the information.
R This step will vary depending on the feature.

[Submit]
R The new setting will be transferred to the unit.

Close the web browser.

Note:
R The settings displayed in the web browser can be updated by clicking [Reload].
R When the unit is in sleep mode, communication between the web browser and the unit may be slower than usual.

You can program the features of the unit in the [Device] menu.
R Most features can be programmed from the unit. For details about the features and selections, see pages 67 to

89 (“10.1  Programming from the unit”).

R The following features can be programmed only through the web browser interface.

Select the PC to send fax reception notification message to (up to 6 destinations).
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type “root” as the user name, then enter the password (feature #155 on

page 69). A [OK]

4. Select [FAX FEATURE] from the menu.
5. Select [ON] from the [RECEIVE NOTIFY] drop-down list.
6. Click [Edit] next to [RECEIVE PC LIST].
7. Click [List] next to the desired destination.
8. Click the desired PC from the list. A [Submit]
9. Close the web browser.

90