Panasonic KXTGD564 Operating Guide
– 4 –
Pairing a Bluetooth cellular phone
1
Base unit:
Press and hold {CELL 1} or {CELL 2} for about 5 seconds.
L
Press and hold {CELL 1} or {CELL 2} for about 5 seconds.
L
After the corresponding CELL indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:
“0000”).
“0000”).
L
If your cellular phone prompts you to confirm the passkey, tap {OK} or otherwise to accept
the pairing request.
the pairing request.
3
Base unit:
Wait until a long beep sounds.
L
Wait until a long beep sounds.
L
It may take more than 10 seconds to complete pairing.
L
When the corresponding CELL indicator lights up, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
base unit. You are ready to make cellular calls.
Note:
L
L
Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone’s operating instructions.
cellular phone’s operating instructions.
Base unit: CELL indicators
Status
Meaning
On
A cellular phone is connected. Ready to make/receive cellular calls.
Flashing
− The cellular line is in use.
− Phonebook entries are being copied from a cellular phone.
− The base unit is searching for the paired cellular phone.
− The base unit is pairing a cellular phone.
− A cellular call is on hold.
− The remote voice assist feature is in use.
Flashing rapidly
A cellular call is being received.
Light off
− A cellular phone is not paired to the base unit.
− A cellular phone is not connected to the base unit.
Handset: Link to cell display items
td
− A cellular line is in use.
L
When flashing: The cellular call is on hold.
L
When flashing rapidly: A cellular call is being received.
− The remote voice assist feature is in use.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
xd
A cellular phone is connected.
Ready to make/receive cellular calls.
L
When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
uv
− A cellular call is in progress on that line.
− The cellular line is selected for the setting.
Link to cell
TGD56x(en)_QG.fm Page 4 Monday, November 21, 2016 3:18 PM