Panasonic KXTGM430 Operating Guide
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
MSAVEN a MOFFN
Selecting the alert tone
1
1
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
For CELL 2: MMENUN#6042
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
MSAVEN a MOFFN
Using a Bluetooth
headset (optional)
headset (optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
Headset Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R Only 2 Bluetooth devices can be used with
).
R For best performance, we recommend
using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within a approximately 10 m (33 feet) range.
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within a approximately 10 m (33 feet) range.
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a Bluetooth
headset to the base unit
headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Bluetooth headset:
Set your headset to pairing mode.
R Refer to your headset’s operating
Set your headset to pairing mode.
R Refer to your headset’s operating
instructions.
2
Handset:
MMENUN#621
MMENUN#621
3
If your headset’s PIN is “0000”, go to
step 4.
If your headset’s PIN is not “0000”,
press MCLEARN, then enter your
headset’s PIN.
R Typically, the default PIN is “0000”.
step 4.
If your headset’s PIN is not “0000”,
press MCLEARN, then enter your
headset’s PIN.
R Typically, the default PIN is “0000”.
Refer to the headset’s operating
instructions.
instructions.
4
Press MOKN, then wait until a long beep
sounds.
sounds.
5
MOFFN
R When the Bluetooth headset is ready
R When the Bluetooth headset is ready
for use:
–
–
is displayed on the handset (H:
Bluetooth headset),
– the CELL 2/HEADSET indicator on
the base unit lights up.
Connecting/disconnecting a
Bluetooth headset
Bluetooth headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MMENUN#622
R A long beep sounds.
2
MOFFN
Unpairing a Bluetooth headset
You can cancel a pairing of the headset that is
stored to the base unit.
stored to the base unit.
1
MMENUN#612
2
MbN: “Yes” a MSELECTN
R When the headset is unpaired,
R When the headset is unpaired,
disappears on the handset.
3
MOFFN
For assistance, please visit http://shop.panasonic.com/support
69
Using Bluetooth® Devices
TGM43x(en)_0426_ver031.pdf 69
2016/04/26 10:55:19