Panasonic SC-PM39D Operating Guide

24

RQT7502

•

Do the preparatory steps (A see above).

•

Tune to the required station (A page 22, The radio).

To stop recording.
Press [L STOP].

When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.

Use normal position tapes.
High position and metal position tapes can be used, but the unit will
not be able to record or erase them correctly.

Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.

The tape direction is automatically set to “F 3”.
To record on the reverse side
Press [/ - TAPE] twice, then press [L STOP].

•

Press [PLAY MODE] to select the reverse mode.
Every time you press the button:

: One side only records.

 , 

: Both sides record (forward → reverse).

“

” is automatically changed to “

” when [SHIFT]+[aREC]

(main unit: [[REC]) is pressed.

•

Do the preparatory steps (A see above).

•

Insert the disc(s) you want to record (A page 12, Discs—Basic
play).

To stop recording (disc play stops automatically).
Press [L STOP].

Front side

The interrupted track is re-recorded in its entirety
on the reverse side

Reverse side

While recording, if a track is cut off in the middle at the end of the front
side, it is re-recorded from the beginning on the reverse side.
At the end of the reverse side, recording stops and the current track
will be interrupted.

(tape facing you, see 

 A page 23, Insert cassette – make

sure that the cassette is fully inserted and close the lid by
hand).

(play starts).

RQT7502_24_25_new1

2/3/04, 9:28 AM

24