Panasonic KXMB2061FX Operating Guide

Important:
R This unit is designed in accordance with the ETS

R This unit will only display the caller’s telephone

R This unit will not support future additional

R Depending on the service of the local telephone

Make sure the following ring count is set to 2 or more
rings beforehand.
– FAX ring count (feature #210 on page 78)
– TAM/FAX ring count (feature #211 on page 79)
– TEL/FAX ring count (feature #212 on page 81)
R The name display service may not be available in

some areas. For further information, please contact
your telephone company.

The calling party’s name or telephone number will be
displayed. You have the option of whether or not to
answer the call.
The unit will automatically store caller information (name,
telephone number and date and time of the call) from the
50 most recent calls. It is possible to view caller
information on the display (page 54) or print the entire
Caller ID list (page 136).
R When caller information is received and it matches a

telephone number stored in the unit’s one-touch dial
or phonebook, the stored name will be displayed.

R If the unit is connected to a PBX (Private Branch

Exchange) system, caller information may not be
received properly. Consult your PBX supplier.

R If the unit cannot receive caller information, the

following is displayed:
“OUT OF AREA”/“Out of Area”: The caller dials
from an area which does not provide a Caller ID
service.
“PRIVATE CALLER”/“Private Caller”: The
caller requests not to send caller information.

Missed calls
If a call is not answered, the unit treats the call as a
missed call. The number of missed calls are shown on
the display (the cordless handset also shows  ). This
lets you know if you should view the caller list to see who
called while you were away.

To confirm caller information by printing the Caller
ID list (Base unit only)
– To print manually, see page 136.
– To print automatically after every 50 new calls,

For call waiting or Call Waiting Caller ID service
users
To use call waiting, you must first subscribe to the call
waiting service of your service provider/telephone
company.
This feature allows you to receive calls while you are
already talking on the telephone. If you receive a call
while on the telephone, you will hear a call waiting tone.
If you subscribe to both Caller ID and Call Waiting
with Caller ID services, the 2nd caller’s information is
displayed on the base unit or cordless handset that is in
use after you hear the call waiting tone.
1. Press MFlash(R)N on the base unit or M

N on the

cordless handset to answer the 2nd call.

2. To switch between calls, press MFlash(R)N on the

base unit or M

N on the cordless handset.

Note:
R Please contact your service provider/telephone

company for details and availability of this service in
your area.

53

7. . Caller ID