Panasonic KXMB2061FX Operating Guide

The unit has 2 pre-recorded greeting messages for TAM/
FAX mode. If you record your own greeting message, it
will be played instead of the pre-recorded greeting
message when a call is received.
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds. We
recommend you record a message of less than 12
seconds to make it easier to receive faxes.
Make sure feature #400 is set to “TAM/FAX” beforehand
(page 80).

Important:
R Only 1 person can access the answering machine

R When callers leave messages, the unit records

MStopN

MSetN

MEraseN MRecordingN

MRecordingN A MSetN

Lift the handset.
R A long beep will sound.

Speak clearly to record your own greeting message.

When finished recording, press MStopN.

Replace the handset.
R The greeting message will be played.

Note:
R You can change the maximum TAM/FAX greeting

message time to 60 seconds (feature #315 on
page 86).
– If you change the setting to 60 seconds, we

recommend that you tell the caller in your TAM/
FAX greeting message to press G9 before
starting the fax transmission.

– If you change the setting from 60 seconds to 16

seconds, your current greeting message will be
deleted. The pre-recorded greeting message will
be played when a call is received.

R If you change the maximum recording time of

incoming messages to “GREET ONLY”/“Greeting
Only” (page 75, feature #305 on page 86), the
unit will answer a call with your current greeting
message, and then hang up. Re-record your greeting
message to inform the caller that the unit will not
record any incoming messages.

MEraseN A MEraseN A MSetN

MSetN
R To cancel erasing, press MStopN.

Note:
R If you erase your TAM/FAX greeting message, the

pre-recorded greeting message will be played when
a call is received.

You can record a voice memo to leave a private message
for yourself or someone else. Recorded messages are
treated as new messages.

MRecordingN A MRecordingN A MSetN

Lift the handset.
R A long beep will sound.

Speak clearly to record a voice message.

When finished recording, press MStopN.

Replace the handset.

Note:
R To play back the voice message, see page 69.
R If you record for over 3 minutes, the unit will stop

recording.

You can record a telephone conversation on the unit.
Recorded messages are treated as new messages.

Press MRecordingN during a conversation.
R “2WAY RECORDING” will be displayed, then the

unit will start recording automatically.

Press MStopN to stop recording.

Note:
R To play back the voice message, see page 69.

68

9. . Answering Machine