Panasonic KXHNS107 Operating Guide
Creating a scenario that controls a compatible thermostat
1
From the [Home Network] app home screen, tap [Smart Control].
R If there are existing scenarios, a list of the devices being controlled by the scenarios is displayed.
R If there are existing scenarios, a list of the devices being controlled by the scenarios is displayed.
Tap
to create a new scenario.
2
Tap [Control Thermostat].
3
Select the device that you want to control.
4
Select the arm mode that you want to use to trigger the smart control scenario.
R The scenario will be executed when the system switches to the selected arm mode.
R The scenario will be executed when the system switches to the selected arm mode.
5
Under [Set to], select the thermostat operation mode that will be selected when the scenario is
executed.
R To edit a mode, tap
executed.
R To edit a mode, tap
next to the desired mode, set each item, and then tap [OK].
R You can configure and save three operation modes for each arm mode.
6
When finished, tap [OK].
Note:
R For information about thermostat settings, refer to the operating instructions included with your
R For information about thermostat settings, refer to the operating instructions included with your
thermostat.
R Some modes and features supported by your thermostat may not be supported by this system.
Using [Trigger when Home Wi-Fi Connects] to trigger smart control scenarios
You can use your mobile device’s Wi-Fi connection to your wireless router as a trigger to control the
following devices.
– Smart plugs
An example use of this feature would be having a light turn on automatically when you return home.
When the app detects that your mobile device has reconnected to your wireless router (because you
came home), it executes the scenario (turning on the light).
In order to use this feature, select [Trigger when Home Wi-Fi Connects] as the trigger when
configuring a smart control scenario.
You can use your mobile device’s Wi-Fi connection to your wireless router as a trigger to control the
following devices.
– Smart plugs
An example use of this feature would be having a light turn on automatically when you return home.
When the app detects that your mobile device has reconnected to your wireless router (because you
came home), it executes the scenario (turning on the light).
In order to use this feature, select [Trigger when Home Wi-Fi Connects] as the trigger when
configuring a smart control scenario.
Note:
R When [Trigger when Home Wi-Fi Connects] is selected, the app checks your mobile device’s Wi-Fi
R When [Trigger when Home Wi-Fi Connects] is selected, the app checks your mobile device’s Wi-Fi
connection periodically so that it can detect when it has connected to your home wireless network
again.
again.
Recording camera images
You can use smart control scenarios to record camera images and save them on the hub’s SD card. For
information about SD cards and how recordings are saved, see “Information about SD cards”, Page 74.
You can use smart control scenarios to record camera images and save them on the hub’s SD card. For
information about SD cards and how recordings are saved, see “Information about SD cards”, Page 74.
Turning smart control scenarios on and off
1
From the [Home Network] app home screen, tap [Smart Control].
2
Select the device that you want to control.
R If the desired device is not displayed, there are no scenarios assigned to that device.
R If the desired device is not displayed, there are no scenarios assigned to that device.
3
Turn the checkbox for the desired scenario on or off.
57
Using the app