Panasonic SC-AK220 Operating Guide

RQT7533

3

Read these operating instructions carefully before using the unit. Follow
the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future
reference.

1)

Read these instructions.

2)

Keep these instructions.

3)

Heed all warnings.

4)

Follow all instructions.

5)

Do not use this apparatus near water.

6)

Clean only with dry cloth.

7)

Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.

8)

Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9)

Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused

for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.

Insert so the poles (+ and –) match those in the remote control.

Do not use rechargeable type batteries.

mix old and new batteries.

use different types at the same time.

heat or expose to flame.

take apart or short-circuit.

attempt to recharge alkaline or manganese batteries.

use batteries if the covering has been peeled off.

keep together with metallic objects such as necklaces.

Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.

Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
held close to the front panel.

Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.

Keep the transmission window and the unit’s sensor free from dust.

Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.

put heavy objects on the remote control.

take the remote control apart.

spill liquids onto the remote control.

Remote control
signal sensor

Transmission

window

About 7 meters in front of
the signal sensor

Please check and identity the
supplied accessories.

ME

MO

RY