Panasonic SC-AK220 Operating Guide
RQT7533
4
ENGLISH
2
AM loop antenna
Stand the antenna up
on its base.
on its base.
(R)
(L)
1
FM indoor antenna
Adhesive tape
Affix where
reception is best.
reception is best.
Voltage selector
Use a flat-head screwdriver to turn the voltage
selector on the rear panel to the appropriate
position for the area in which this system is
used. If the power supply in your area is
115 V or 120 V, please set the voltage
selector as follows:
selector on the rear panel to the appropriate
position for the area in which this system is
used. If the power supply in your area is
115 V or 120 V, please set the voltage
selector as follows:
•
For 115 V: Set to 110 V.
•
For 120 V: Set to 127 V.
VOLT ADJ
4
GCP
only
To household
AC outlet
AC outlet
Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
5
AC power supply cord
Note
The included AC power supply cord is for use with
this unit only. Do not use it with other equipment.
this unit only. Do not use it with other equipment.
For your reference
To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
You will need to reset some memory items after
plugging in the unit.
To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
You will need to reset some memory items after
plugging in the unit.
Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
GCP
only
If the power plug does not fit your socket, use the
power plug adaptor (included).
power plug adaptor (included).
3
Speakers
Placement
Speakers are designed identically so that
no left or right channel orientation is
necessary.
no left or right channel orientation is
necessary.
Note
•
Keep your speakers at least 10 mm
away from the system for proper
ventilation.
away from the system for proper
ventilation.
•
These speakers do not have
magnetic shielding. Do not place
them near televisions, personal
computers or other devices easily
influenced by magnetism.
magnetic shielding. Do not place
them near televisions, personal
computers or other devices easily
influenced by magnetism.
•
You cannot take the front net off
the speakers.
the speakers.
Connection
Black
Connector
Appliance inlet
Approx. 6 mm
Caution
•
Use the speakers only with the recommended system. Failure
to do so may lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience
a sudden change in performance.
to do so may lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience
a sudden change in performance.
•
Do not attach these speakers to walls or ceilings.
ME
MO
RY
1
3
2
Use only the supplied speakers.
The combination of the main unit
and speakers provide the best
sound. Using other speakers can
damage the unit and sound quality
will be negatively affected.
The combination of the main unit
and speakers provide the best
sound. Using other speakers can
damage the unit and sound quality
will be negatively affected.
Black (–)
Red (+)
Red
Connect the left (L)
side in the same way.
side in the same way.