Panasonic KXTG7875 Operating Guide
*17 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*18 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
pick up the waiting call.
*19 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
the line mode to “A” if telephone line condition is not good.
*20 This setting is available when a cellular phone is paired.
*21 KX-TG7871 series: page 3
*22 This setting is available when a headset is paired.
*21 KX-TG7871 series: page 3
*22 This setting is available when a headset is paired.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
(page 16).
Handset
1
MMENUN#720
2
MbN: Select the desired alarm option. a
MSELECTN
MSELECTN
“Off”
Turns alarm off. Go to
step 7.
step 7.
“Once”
An alarm sounds once at
the set time.
the set time.
“Daily”
An alarm sounds daily at
the set time. Go to step 4.
the set time. Go to step 4.
3
Enter the desired month and date. a
MOKN
MOKN
4
Set the desired time.
5
*: Select “AM” or “PM”. a MOKN
6
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
outside calls.
7
MSELECTN a MOFFN
R When the alarm is set,
R When the alarm is set,
is displayed.
Note:
R To stop the alarm, press MOFFN or place
R To stop the alarm, press MOFFN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
mode.
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Important:
R Set the date and time beforehand
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Important:
R Set the date and time beforehand
(page 16).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
Handset
1
MMENUN#238
2
MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
MSAVEN
R If you select “Off”, press MOFFN to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
wish to start this feature.
4
*: Select “AM” or “PM”. a MOKN
44
For assistance, please visit http://www.panasonic.com/help
Programming
TG78xx(en)_1210_ver101.pdf 44
2012/12/10 21:19:28