Panasonic KX-P7510 Operating Guide
177
For Macintosh User’s Guide
3
Make sure both metal clips on the connector are fastened, and the two pins
on each of the connector are pushed through the holes on the PS SIMM.
on each of the connector are pushed through the holes on the PS SIMM.
4
Continue with
The following section explains how to install a Network Card for Ethernet (KX-PNB2) on the KX-
P7500.
P7500.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
), touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
Installing a Network Card for Ethernet
Metal clip
Network Card for Ethernet