Panasonic RPBTS50E Operating Guide

 •During an incoming call, 

ringtone will sound from the 

earphones and the LED will 

blink.

 •(

HFP only) To reject the 

incoming call, press   twice 

quickly until the ringtone stops.

 •Also refer to the operating 

manual for the Bluetooth

 

enabled phone.

 •During an outgoing call, ringtone 

will sound from the earphones 

and the LED will blink.

 •To cancel the outgoing call, 

press  .  

A beep will sound.

 •The LED will repeatedly blink 2 times during a call.

 •The volume can be adjusted during a phone call. For setting instructions, see 

“Remote controlling”. (→ P. 5)

 •A beep will sound.

■

 •There may be instances when hands free setting needs to be done on the 

Bluetooth

 enabled phone.

 •Depending on the Bluetooth

 enabled phone, you may hear incoming and 

outgoing call ringtones of the phone from the unit.

 •(

HFP only) Press   twice quickly on the unit. The calling device will be switched 

between the Bluetooth

 enabled phone and the unit.

 •When the illumination lights are turned on, the LED indicator light will be turned 

off.

The unit is equipped with the blue LED illumination lights on the right and left 

earphones. The LED illumination is off by factory default. It is set to off every time 

the unit is turned off.

To turn the lights on, press + and − simultaneously. To turn them off, press and hold 

+ and − simultaneously for approximately 3 seconds.

 •When the battery level is getting low, the illumination lights will be turned off.

 •When the illumination lights are turned on, the LED indicator light will be turned 

off.

 •When the LED illumination is turned on, operating time will be shorter.

This unit can be reset when all operations are rejected. To reset the unit, connect 

the unit to a computer using the USB charging cord. All the previous operations will 

be cancelled. (The pairing device information will not be deleted.)

If the unit is silent for approximately 5 minutes and operations for Bluetooth

 

devices are idle during that period, a beep will sound and the power will be 

automatically turned off.

When the battery level is low during use of the unit, the blue blinking LED on the 

right earphone will change to red. A beep will sound every 1 minute. When the 

battery runs out, the power will turn off.