Panasonic LQDRM200 Operating Guide

[RAM] [DVD-R]

You can record audio and video being played on a video cassette 
player or a video camera connected to the input terminals.

Preparation
≥Before connecting any cables, first make sure that the power for 

both units is off.
Then after connecting any cable, turn on the both units.

≥Connect the other equipment to this unit’s input terminals 

(page 50).

≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP or EP (page 19).
≥It is also possible to perform the flexible recording (FR)

(page 20).

W, X, CH] (23) or [INPUT SELECT] (22) to 

≥Select AV1, AV2 or AV3.

¥, REC] (31) at the point you want to start 

[RAM] [DVD-R]

You can record audio and video being played on a DV equipment 
connected to the DV input terminal.

Preparation
≥Before connecting any cables, first make sure that the power for 

both units is off.
Then after connecting any cable, turn on the both units.

≥Connect the other equipment to this unit’s input terminals 

(page 50).

≥Use a DV cable to connect the equipment.
≥Switch [DVD, TV] (19) to “DVD”.
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP or EP (page 19).
≥It is also possible to perform the flexible recording (FR)

(page 20).

W, X] (23) or [INPUT SELECT] (22) to select 

≥Select DV.

¥, REC] (31) at the point you want to start 

Stereo 1:
Records sound (L1, R1) when DV recording is taking place.
Stereo 2:
Records added sound such as narration (L2, R2) subsequent to 
original recording.
Mix:
Records both Stereo 1 and Stereo 2.

≥L1+L2 are recorded in L and R1+R2 are recorded in R. In the 

case of bilingual broadcast, Stereo 1 is recorded when recording 
to DVD-R or if recording in LPCM. Details of recording are given 
in “Bilingual Audio Selection” (page 53).

ªTo skip unwanted parts

Press [

;] (8) to pause recording.

Press again to restart recording.

ªTo stop recording

Press [

∫] (7).

Note
≥Stop play on the other equipment as well.
≥This unit does not support recording the signal from a personal 

computer.

≥The audio recorded through the DV Input terminal is the audio 

selected in the “Audio mode for DV Input” (page 53).

For your reference
≥Poor video quality or colouring may indicate that the material you 

are recording has copy protection.

≥Select the TV system (PAL/NTSC) of the programme you wish to 

record (page 54).

≥Any software that has been so treated cannot be recorded using 

this unit.

≥We recommend connecting one piece of DV equipment at a time.
≥When DV equipment is connected, it is not possible to use the 

DV terminal and operate the unit from other equipment.

≥In the case of some DV equipment, pictures and sound may not 

be received properly.

≥If there is no television picture when playing back from an 

external device, turn the external device off and then on once 
again.

≥Almost all videos and DVD software on sale have been treated to 

prevent illegal copying. Any software that has been so treated 
cannot be recorded using this unit.

≥When recording from DV equipment, the audio setting can be 

made at “Audio Mode for DV Input” (page 53).

E60TEG.book  26 ページ  ２００３年９月１日 月曜日 午後５時６分