Panasonic LQDRM200 Operating Guide

Changing the unit’s settings (continued)

By changing the remote control code, you can operate other DVD 
recorders and players manufactured by Panasonic.
Most of the DVD recorders and players manufactured by 
Panasonic use the same system for their remote controls, so if you 
operate them in the same place, the controls can be confused by 
the different pieces of equipment. Use the following procedure to 
change the remote control code to solve this problem. 
≥Use “1”, the factory set code, under normal circumstances. 

Preparation
≥Switch [DVD, TV] (19) to “DVD”.

(10) and the numeric buttons (4) 

Note
≥Be sure to set the same remote control code on the main unit as 

you did for the remote control itself (page 52, “Settings”—
“Remote”).

≥The following display appears on the unit’s display if its code and 

the remote control’s code are different. Change the remote 
control’s code to suit the unit.

The unit’s remote control code

≥The display disappears after about 5 seconds. 

Preparation
≥Switch [DVD, TV] (19) to “DVD”.

(35) to show the SETUP window.

3, 4] (10) to select the “Settings” tab and 

2] or [1] (10).

3, 4] (10) to select “Clock” and press 

(10).

2, 1] (10) to select the item you want to 

≥The items change as follows:

Hour

()Minute()Second()Day()Month()Year

   

^ ----------------------------------------------------------------------------------------J

3, 4] (10) to change the setting and press 

(10).

≥You can also use the numeric buttons (4) for setting.

Note
In the event of a power failure, the clock will operate on its back up 
system for a minimum of 3 years.

The all settings in the SETUP screen return to the factory settings.
(except for the ratings level and the password)

Preparation
≥Switch [DVD, TV] (19) to “DVD”.

After performing steps 1 to 2 of “Clock Settings”, perform the 
following steps:

3, 4] (10) to select “Shipping Condition” and 

2, 1] (10) to select “Yes” and press [ENTER] 

(10).

2, 1] (10) to select “Yes” and press [ENTER] 

(10).

   RETURN

E60TEG.book  56 ページ  ２００３年９月１日 月曜日 午後５時６分