Panasonic KXTG8063E Operating Guide

Page of 52
Useful Information
43
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Error messages
*1 KX-TG8061/KX-TG8062/KX-TG8063
Display message
Cause/solution
Base no power
or
No link to base. 
Reconnect main 
base AC adaptor.
L
The handset has lost communication with the base unit. Move 
closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit. Reconnect 
the adaptor and try again.
L
The handset’s registration may have been cancelled. Re-register 
the handset (page 30).
Check Phone Line
L
The supplied telephone line cord has not been connected yet or 
not connected properly. Check the connections (page 11).
Error
L
Recording was too short. Try again.
Failed
L
Phonebook copy failed (page 22). Confirm the other handset (the 
receiver) is in standby mode and try again.
Incomplete
L
The receiver’s phonebook memory is full. Erase the unwanted 
phonebook entries from the other handset (the receiver) and try 
again.
Memory Full
L
The phonebook memory is full. Erase unwanted entries (page 
22)
.
L
Message memory is full. Erase unwanted messages (page 35
36)
.
L
The call barred list memory is full. Erase unwanted entries (page 
29)
.
Use rechargeable 
battery.
L
A wrong type of battery such as Alkaline or Manganese was 
inserted. Use only the rechargeable Ni-MH batteries noted on 
page 4, 8.
You must first 
subscribe to 
Caller ID.
L
You must subscribe to a Caller ID service. Once you receive 
caller information after subscribing to a Caller ID service, this 
message will not be displayed. 
TG8051_8061E(e).book  Page 43  Monday, January 24, 2011  4:37 PM