Panasonic KX-P8420 Operating Guide
Chapter 9
193
Options
Upgrade options
The following upgrade options and consumables are available for the
KX-P8420 Color Printer from your local Panasonic reseller:
KX-P8420 Color Printer from your local Panasonic reseller:
•
Hard Disk Drive (KX-PDHD1) for storing print jobs, and additional fonts
(
(
•
16 MB (KX-PEMD1) or 32 MB (KX-PEMD2) SDRAM DIMMs (
Two DIMM slots for additional memory are available on the printer
controller board. Each slot can support a 16 MB or 32 MB SDRAM DIMM.
controller board. Each slot can support a 16 MB or 32 MB SDRAM DIMM.
•
Ethernet (KX-PNBC5) or Token Ring (KX-PNBC6) network card
(
(
You must remove the printer controller board from the back of the
KX-P8420 in order to install or replace the hard disk, add or replace
memory, or install a Token Ring or Ethernet network card.
KX-P8420 in order to install or replace the hard disk, add or replace
memory, or install a Token Ring or Ethernet network card.
Removing and replacing the printer controller board
To remove the printer controller board:
1
Turn the printer OFF, unplug the power cord and
disconnect any cables connected to the connectors on
the back of the printer.
disconnect any cables connected to the connectors on
the back of the printer.
2
Loosen the two thumbscrews that secure the printer
controller board to the back of the printer, using a cross-
point head (+) screwdriver.
controller board to the back of the printer, using a cross-
point head (+) screwdriver.