Panasonic KX-P8420 Operating Guide

The following section explains how to install either an Ethernet (KX-PNBC5) 
or Token Ring (KX-PNBC6) network card (illustrated below) on the 
KX-P8420. It also describes how to configure the printer Setup when the 
new network card has been installed. 

To install the network card you will need to do the following:

•

Remove the printer controller board from the back of the printer.

•

Install the network card on the printer controller board.

•

Replace the printer controller board.

•

Configure the printer’s network setup.

•

To avoid electric shock ensure your hands are dry before touching the 
printer’s power plug.

•

Ethernet (KX-PNBC5) or Token Ring (KX-PNBC6) network card

•

Do not drop or bend the network card.

•

Do not touch the connector of the network card.

•

Protect the network card from static electricity by keeping it in its anti-
static package until you are ready to install it.

•

Avoid exposing the network card to direct sunlight, high temperatures, or 
humidity.

Before you begin this procedure, remove the printer controller board from 
the printer. For instructions, see “Removing and replacing the printer 
controller board” on