Panasonic KXTGL463 Operating Guide
Adjusting the ringer volume
Handset
n
While the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n
While the handset is in standby mode:
Press MjN or MkN repeatedly to select the
desired volume for landline call.
Press MjN or MkN repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press MkN repeatedly.
Base unit
n
While the base unit is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n
While the base unit is in standby mode:
Press MjN or MkN repeatedly to select the
desired volume for landline call.
Press MjN or MkN repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Note for handset and base unit:
R You can adjust the ringer volume for
R You can adjust the ringer volume for
R The ringer volume you set is kept for each
line (landline and cellular lines).
One-touch ringer off for the handset
Press and hold 0 until the unit beeps to turn
the ringer off. While the ringer is turned off, the
handset will not ring for cellular calls or for
landline calls.
R You can turn the ringer on again by
the ringer off. While the ringer is turned off, the
handset will not ring for cellular calls or for
landline calls.
R You can turn the ringer on again by
pressing and holding 0 until the unit beeps.
Useful features during a
call
Hold
1
1
Press MMENUN during an outside call.
2
MbN: “Hold” a MSELECTN
3
To release hold on the cellular line:
Press MCELLN.
Press MCELLN.
R Another handset user can take the call
by pressing MCELLN.
*1 If you press MCELLN and the
selection list is displayed, select
the desired cellular line and press
MSELECTN.
the desired cellular line and press
MSELECTN.
To release hold on the landline:
Press M
Press M
/ZN.
R Another handset user can take the call
by pressing M
/ZN.
Note:
R After holding for 10 minutes, the call is
R After holding for 10 minutes, the call is
disconnected.
Mute
1
1
Press MDN (Mute) during a call.
2
To return to the call, press MDN (Mute).
Flash for landline calls
Flash button allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 39.
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 39.
For call waiting or Call Waiting
Caller ID service users
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the unit
that is in use after you hear the call waiting
tone.
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the unit
that is in use after you hear the call waiting
tone.
1
Press MACCEPTN to answer the 2nd call.
2
To switch between calls, press MFLASHN.
22
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
TGL46x(en)_0126_ver101.pdf 22
2016/01/26 17:25:17