Panasonic DMREZ28 Operating Guide

54

RQT9118

(

➔ 50, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Display

e

, r select “Display” 

➔ q ➔ e, rselect item ➔

Choose the subtitle language for digital broadcast.
If the selected subtitle is not available, then the available subtitle 
will be shown.
[English] [Welsh] [Gaelic]
[English for hearing impaired]
[Welsh for hearing impaired]
[Gaelic for hearing impaired]

Choose the approximate time until the digital channel information 
screen (

➔ 36) disappears automatically.

The length of time the control panel (

➔ 39) is displayed can also 

be changed, but “Off” does not work.
[Off]

The digital channel information is not displayed.

[3 sec.] [5 sec.] [7 sec.] [10 sec.]

Changes the brightness of the unit’s display.
Regardless of the setting, when “Power Save” (

➔ 56) is “On” and 

this unit is turned off, the unit’s display is turned off.
[Bright]
[Dim]

When a new DVB channel is added, this unit will be informed 
automatically. Then the confirmation message appears. If you 
select “Yes” on the display, Auto-Setup starts (All channel 
settings and all created profiles are deleted. The timer recording 
programmes are also cancelled.).
[Automatic]
[Off]

The Service Messages are not shown.

Connection

e

, r select “Connection” 

➔ q ➔ e, rselect item ➔

This setting needs to be changed when connected to a 4:3 
standard aspect TV. 
Press [e, r] to select the TV Aspect, then press [OK].
[16:9] [4:3] [Letterbox]

 Notes

4:3

16:9

4:3 standard aspect television

16:9 widescreen television

• 16:9:  When connected to a 16:9 widescreen television.

However, the 4:3 aspect ratio picture expands left and 
right.

• 4:3:  When connected to a 4:3 aspect 

television, side picture is trimmed 
for 16:9 picture (

➔ 72, Pan & Scan).

Letterbox:  When connected to a 4:3

aspect television, widescreen
picture is shown in the
letterbox style (

➔ 72).

You can enjoy progressive video by connecting this unit’s 
COMPONENT VIDEO OUT terminals to an LCD/plasma television 
or LCD projector compatible with progressive scan (

➔ 73).

Before this setting, set “AV1 Output” to “Video (with component)” or 
“S Video (with component)” (

➔ 55).

Press [e, r] to select “On”, then press [OK].
[On]  Output becomes progressive.
[Off]
This setting is fixed with “Off” and there is no output from the 
COMPONENT VIDEO OUT terminals if you set “AV1 Output” to 
“RGB 1 (without component)” or “RGB 2 (without component)” 
(

➔ 55).

 Notes

When connected to a regular television (CRT: cathode ray 
tube) or a multi-system television using PAL mode, even if it is 
progressive compatible, progressive output can cause some 
flickering. Turn off “Progressive” if this occurs (

➔ 47).

Picture will not be displayed correctly if connected to an 
incompatible television.

•

•

DMR-EZ28-EB _RQT9118-B.indb   54

DMR-EZ28-EB _RQT9118-B.indb   54

2008/04/04   15:00:15

2008/04/04   15:00:15