Panasonic DMREZ28 Operating Guide

56

RQT9118

(

➔ 50, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Others

e

, r select “Others” 

➔ q ➔ e, rselect item ➔

Remote Control (➔ 65)

[DVD 1] [DVD 2] [DVD 3]

Clock (➔ 12)

Owner ID (➔ 11)

In order to prevent another person from using this unit if it is 
stolen, you can set a PIN number and input your personal 
information.
Once the PIN number has been set, you cannot return to the 
factory preset. Make sure not to forget this.

PIN number
Name
House No.
Postcode 

•
•
•
•

[On] [Off]
Refer to the following when “Power Save” is set to “On”.

Power consumption is minimized when the unit is turned off 
(

➔

74).

Startup of the unit becomes slower compared to when “Power 
Save” is “Off”.
When the unit is off, satellite programmes cannot be watched on 
the TV because the signal from the satellite receiver connected 
to AV2 input terminal of this unit is not looped through. To watch 
them, turn on the unit.

•

•

•

In order to update this unit, the TV Guide download, and support 
system changes made by broadcasts, this unit periodically 
performs software updates.

Press [OK] to show the following settings.
Update data and TV Guide download information are sent by an 
unscheduled digital broadcast. In order to receive these updates, 
you must be able to receive digital broadcasts.
An update will take approximately 60 minutes. While the update 
is in progress,“SW-DL” appears on the unit’s display.
You cannot operate the unit until the update is complete. 
Removing the AC mains lead while the update is in progress 
may damage the unit.
A TV Guide download will take approximately 30 minutes. 
While the TV Guide download is in progress, “GUIDE” appears 
on the unit’s display. The TV Guide download can be interrupted 
by switching on the unit.
To avoid hearing the startup sound of System Update for the 
unit, perform the following steps.

Select the time for Software Update (

➔ below, TV Guide/

Software search period).
Set “TV Guide Download in Standby” and “Software Update in 
Standby”(

➔ below) to “Off”, and update manually (➔ below, 

Software Update Search Now).

[On]

When the unit is turned off, TV Guide data is 
downloaded automatically.

[Off]

[On]

You can perform the unit updates automatically when 
the unit is turned off. 

[Off]

Selects the time to automatically perform TV Guide download 
and updates when the unit is turned off. This can only be set 
when “TV Guide Download in Standby” and “Software Update in 
Standby” is set to “On”.

If there is a programmed recording set for the time you have 
selected, the programmed recording will be given priority.

[Automatic] The unit will give priority to searching for update data 

at midnight.

[02:00-06:00] [06:00-10:00] [10:00-14:00] 
[14:00-18:00] [18:00-22:00] [22:00-02:00]

•

Start the search for new software manually.
A new software version is announced by a message. Do not 
switch your unit off during the update. This could result in the loss 
of data. A message shows that the update has finished. If a new 
software version is not going to be broadcast until the next few 
days, a corresponding message also appears.

If applicable update data is found, press [w, q] to select “Yes” 
and press [OK].

•

•
•

•

•

•

–

–

Press [OK] to show the following settings.

This returns Setup menus to default settings, except for the 
ratings level, ratings password, Owner ID and Clock setting.
[Yes] [No]

The timer recording programmes are also cancelled.

•

This returns Setup menus to default settings, except for the 
programmed channels, time settings, disc language settings, 
ratings level, ratings password, Owner ID and remote control 
code.
[Yes] [No]

DMR-EZ28-EB _RQT9118-B.indb   56

DMR-EZ28-EB _RQT9118-B.indb   56

2008/04/04   10:32:29

2008/04/04   10:32:29