Panasonic DMREZ27EB Operating Guide
22
RQT8856
Recording from a VCR, etc.
Connect cables while both the unit and the external
device are turned off.
Front of the unit
Yellow White Red
You can get a
sharper, clearer
picture by
connecting with
an S Video
cable instead of
the yellow video
cable.
sharper, clearer
picture by
connecting with
an S Video
cable instead of
the yellow video
cable.
Audio/Video
cable
cable
S Video cable
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the unit.
RAM
If the disc is protected, release protection
(
➔ 44).
When the output signal from the external device is
NTSC, change the “TV System” to “NTSC” in the
Setup menu (
NTSC, change the “TV System” to “NTSC” in the
Setup menu (
➔ 51).
To reduce noise in input from a video cassette
recorder, set “AV-in NR” to “On” in the on-screen
display (
recorder, set “AV-in NR” to “On” in the on-screen
display (
➔ 43).
•
•
•
•
•
Insert a disc.
to select the recording
mode
(
➔ 18).
to select the input where
your external device is connected.
Front panel inputs are AV3.
–
Start play on the external device.
at the point you want to
start recording to the disc.
Notes
When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
device, timer recording takes priority and recording from the
external device stops.
Tips
You can also connect to the AV2 on the rear.
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
•
•
•
•
Recording from an External Device
RQT8856-B_DTP_070306.indb 22
RQT8856-B_DTP_070306.indb 22
2007/04/04 17:48:40
2007/04/04 17:48:40