Panasonic DMREZ27EB Operating Guide

24

RQT8856

•  Turn on the television and select the appropriate 

video input to suit the connections to this unit.

• 

 If the disc is protected, release protection

(

➔ 44).

•  Insert a disc with enough remaining blank space.

•  Confirm that the clock on the unit’s display is set to 

the correct time.

•  If connected via a satellite receiver, set channel 

there before timer recording starts.

 

Drive

space

No. Name

Date Start Stop Mode STTL

Press OK to store new programme.

Timer

Recording

OK

RETURN

Remain 1:54 SP

14:15:16 6/ 3 MON

NewTimer Programme

 e, r to select “New Timer 

Programme” then 

 w, q to move through the items 

and e, r to set the items.

 

All services : -----

Timer

Recording

OK

RETURN

Change

Profile

Name

Date

Start

Stop

Mode STTL

--/-- -- --:-- --:--

--

SP

Programme Name

Remain 1:54 SP

14:15:16 6/ 3 MON

Number

0

9

Please set Channel.

---

Name:

TV Station Name/External Input

When recording satellite 

programmes, select “AV2”.
You can press the “Blue” button to 
change the category.
[e.g., Free TV, Radio, Registered 
Profiles (

➔ 46)]

–

•

•

Date:

You can set a daily or weekly 

programme (

➔ Tips).

–

Start (start time) / Stop (end time):

Hold button to change in 30-minute 

increments or decrements.

–

Mode:

Recording mode (

➔ 18)

–

STTL [Subtitles (

➔ 32)]:

ON/OFF

–

Programme Name:

Press [OK], see page 36.

 

The timer icon is displayed in left column.

 

“z” lights on the unit’s display to indicate 
timer recording standby has been activated. 
Repeat steps 2−4 to programme other 

recordings.
Press [8] to turn the unit off.

–

–

–

–

 Notes

“z” on the unit’s display flashes when the unit cannot go to timer 
recording standby. (e.g., a recordable disc is not in the disc tray).
When timer recordings are set to start one immediately after 
another, the unit cannot record the beginning of the later 
programme.
If two timer recording times overlap, the first recording always has 
priority. The second recording will start only after the first recording 
has finished.
Recorded subtitles cannot be deleted later.
Timer Recording does not start while a disc is being formatted, 
deleted or finalised. The recording begins afterwards.
When “Name” is set in AV1, AV2 or AV3, STTL setting is 
unavailable.

 Tips

To exit the timer recording list
Press [PROG/CHECK].

“Date” Setting
Each press of [e] changes items in the order below.
(Each press of [r] changes items in the reverse order.)

Daily timer

Weekly timer

One month later

minus one day

Current date

SAT

---

---

SUN

SUN-SAT

MON-SAT

MON-FRI

You can also use the numbered buttons to enter “Name”, “Date”, 
“Start”, and “Stop”.
You can also press [REC MODE] to switch “Mode” and press
[STTL   ] to switch “STTL”.

 

While the unit is on 

Confirmation screen appears.

–

 w to select “Stop Recording” then 

 Notes

Recording stops and the timer programme is deleted. (Daily and 
weekly timer programmes remain and timer recording will start as 
programmed.)

•

•

•

•
•

•

•

•

•

•

RQT8856-B_DTP_070306.indb   24

RQT8856-B_DTP_070306.indb   24

2007/04/04   17:48:42

2007/04/04   17:48:42