Panasonic PTVZ570 Operating Guide
Troubleshooting
Please check following points. For details, see the corresponding pages.
Problem
Cause
Reference
page
Power does not turn
on.
f
The power cord may not be connected.
f
No electric supply is at the wall outlet.
f
The circuit breakers have tripped.
f
Is the lamp indicator <LAMP> or temperature indicator <TEMP> lit or blinking?
f
The lamp cover has not been securely installed.
35
—
—
98
101
No picture appears.
f
Are connections to external devices correctly performed?
f
The input selection setting may not be correct.
f
The [BRIGHTNESS] adjustment setting may be at the minimum setting.
f
Is the external device that is connected to the projector working properly?
f
The AV MUTE function may be in use.
32
39
50
—
43, 69
The picture is fuzzy.
f
The lens cap is still attached to the lens.
f
The lens focus may not have been set correctly.
f
The projector may not be at the correct distance from the screen.
f
The lens may be dirty.
f
The projector may be tilted too much.
17
39
27
16
16
—
The color is pale or
grayish.
f
[COLOR] or [TINT] adjustment may be incorrect.
f
The input source which is connected to the projector may not be adjusted
correctly.
f
RGB cable is damaged.
51
—
—
—
No sound from the
internal speaker.
f
Is the external device connected correctly to the audio input terminal?
f
The volume may have been set to the minimum level.
f
The AV MUTE function may have been turned on.
f
When the <VARIABLE AUDIO OUT> terminal is plugged-in, the projector's built-
in speaker is not available.
f
The MUTE function may have been turned on.
f
Is the audio input selection in [AUDIO SETTING] set correctly?
32, 33
41, 74
43, 69
32, 33
43, 74
41, 74
43, 69
32, 33
43, 74
74
The remote control
does not operate.
f
The batteries may be weak.
f
The batteries may not have been inserted correctly.
—
23
f
The remote control signal receiver on the projector may be obstructed.
20
f
The remote control unit may be out of the operation range.
20
f
Strong light such as fluorescent shine onto the signal receiver.
20
f
The [REMOTE CONTROLLER] setting is set to [DISABLE] in [CONTROL
DEVICE SETUP].
79
f
Is the ID number setting operation correct?
43
Menu screen does not
appear.
f
Is the on-screen display function turned off (hidden)?
64
The control buttons of
the projector do not
operate.
f
The [CONTROL PANEL] setting is set to [DISABLE] in [CONTROL DEVICE
SETUP].
79
The picture does not
display correctly.
f
There may be a problem with the VCR or other signal source.
f
A signal which is not compatible with the projector is being input.
—
111
Picture from a
computer does not
appear.
f
The cable may be longer than the optional cable.
f
The external video output from a laptop computer may not be correct.
—
—
—
Video from HDMI
compatible device
does not appear or it
appears jumbled.
f
Is the HDMI cable securely connected?
f
Turn off the power of the projector and the connected devices. Then turn the
power of the projector and the connected devices back on.
f
Is a signal which is not compatible with the projector being input?
32, 33
—
111
Audio from HDMI
compatible device
does not appear.
f
Set to the linear PCM audio for the connected devices.
—
Attention
f
If the problem persists, after confirming the contents of the table, please consult your dealer.
Chapter 5 Maintenance - Troubleshooting
ENGLISH - 103