Panasonic PTVZ570 Operating Guide

*2  The indicator will light as the following order:

2.0 seconds (light) → 2.0 seconds (off) 

*3  The indicator will light as the following order:

0.5 seconds (light) → 0.5 seconds (off)

 

f

If the power indicator <ON (G)/STANDBY (R)> is blinking in red in a cycle of 2.75 seconds (light) → 0.25 seconds (off) → 

0.75 seconds (light) → 0.25 seconds (off) → 0.75 seconds (light) → 0.25 seconds (off), please consult your dealer.

Before switching on the projector, make sure all the other devices are correctly connected (x page 31) and remove the lens 

cap.

 

f

The power indicator <ON(G)/STANDBY(R)> lights or blinks, and the projector will enter the standby mode. 

3)  Press the power button <v/b> on the control panel or on the remote control.

 

f

The power indicator <ON(G)/STANDBY(R)> lights in green and the image is soon projected on the screen.

 

f

Be sure to remove the lens cap before starting projection.

 

f

If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO] (x page 73), it may 

take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with when 

[NORMAL] is set. 

 

f

If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NORMAL], it may take 

approx. 1 minute to enable the network function after connecting the power cord.

When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] in the [PROJECTOR 

SETUP] menu is executed, the focus adjustment screen is displayed after projection starts, then the initial setting screen is 

displayed. Set them in accordance with circumstances.  

In other occasions, you can change the settings by menu operations.

Select the language to show on the screen.

After completed the initial setting, you can change the display language from the [LANGUAGE] menu.

1)  Press asqw to select the display language. 

36 - ENGLISH