Panasonic PTVZ570 Operating Guide
Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1) Press the <AV MUTE> button on the remote control.
f
The audio and image turn off.
2) Press the <AV MUTE> button again.
f
The audio and image turn on.
Note
f
When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P-TIMER function
You can operate the P-TIMER function.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
button
1) Press the <P-TIMER> button on the remote control.
f
The count is started.
f
The elapsed time or the remaining time is displayed at the bottom right of the projected image.
2) Press the <P-TIMER> button again.
f
The count is stopped.
3) Press the <P-TIMER> button again.
f
The count is resumed.
Note
f
Pressing the <P-TIMER> button for at least 3 seconds to release the P-TIMER function.
f
For details, please refer to the [DISPLAY OPTION] menu → [P-TIMER]. (x page 68)
Using the MUTE function
This button allows you to turn off the audio output temporarily.
button
1) Press the <MUTE> button on the remote control.
f
The audio turns off.
2) Press the <MUTE> button again.
f
The audio turns on.
Setting the ID number of the remote control
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector
individually by using single remote control, if unique ID number is assigned to each projector.
After setting the ID number of the projector, set the same ID number to the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID ALL> button on
After setting the ID number of the projector, set the same ID number to the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID ALL> button on
the remote control. Also, you can control a projector by pressing the <ID ALL> button on the remote control even if you do not
know the projector ID.
buttons
1) Press the <ID SET> button on the remote control.
Chapter 3 Basic Operations - Basic operations by using the remote control
ENGLISH - 43